BYDOEM match

Made by BYD. Matched to your BYD.

The factory wallbox for Atto 3, Seal, Dolphin and Sealion 7. Talks straight to the BYD app, no third-party pairing headaches.

Rated power: 7.4 kW · 1P · 32 A
Connector: Type 2 tethered · 5 m
Connectivity: Wi-Fi 2.4 GHz · Bluetooth

Free quote with the Home Wall Charger 7 kW Full specs

Licensed WA electricians · EC# 15317 · 10-year workmanship

Why it made the list

The clean, quiet OEM pick.

BYD moved from underdog to Australia's second-largest EV brand in two years, a lot of Atto 3s, Seals and Dolphins have landed on Perth driveways. Their home wall charger is deliberately minimal: a white sealed IP54 shell, a single status LED, and a tethered Type 2 lead. It's OCPP 1.6J compliant, so it plays with future load managers, and it inherits every safety layer BYD builds into its own DC chargers, overcurrent, over-voltage, DC leakage detection. If you already trust BYD with your car, you'll trust their charger with your wall.

Best for

BYD owners who want a matched-brand install with a single app across car and charger.

Full compatibility with the BYD app ecosystem
OCPP 1.6J compliant, works with future load managers
Weather-sealed IP54 for outdoor Perth mounting
Overcurrent, over-voltage and DC leakage protection
Simple, uncluttered white housing to suit any wall

What sets the Home Wall Charger 7 kW apart.

7.4 kW steady

Full 32 A single-phase, around 50 km of range per hour. Overnight fills every BYD sold in Australia.

One app

Same BYD app you use for the car handles schedule, kW, session history and start/stop from the couch.

Layered protection

Built-in overcurrent, over-voltage, over-temperature and 6 mA DC leakage detection. No extra hardware to add.

5 m Type 2 lead

Tethered cable at the length that suits Perth double-bay garages. No coiling awkwardness.

OCPP 1.6J

Ready to plug into any future workplace or strata load-management system. Bought once, ready for whatever's next.

Understated design

White powder-coat, LED strip, no screen, designed to disappear on a rendered brick facade.

Specification

Every number that matters.

Rated power: 7.4 kW · 1P · 32 A
Connector: Type 2 tethered · 5 m
Connectivity: Wi-Fi 2.4 GHz · Bluetooth
Protection: IP54 · IK08
Dimensions: 397 × 210 × 108 mm
Standard: OCPP 1.6J
Operating range: −30 °C to +55 °C
Warranty: 3 yr BYD · 10 yr install

Compliant with EN IEC 61851-1, IEC 62196-2 and AS/NZS wiring rules for WA.

Configurations

Pick the phase.

Tethered7 kW
Standard supply1P · 32 A

One team. Certified. Done in a day.

Step 01
Free online quote
Two minutes. Snap your switchboard, tell us your EV, we email a quote within 24 hours.
Step 02
Site check and book
Our team confirms the cable run and load balancing, then locks in a date that suits you.
Step 03
Certified install day
Licensed WA electricians. Wall mount, switchboard tie-in, RCD and full compliance paperwork.
Step 04
App pairing and handover
We pair the unit to your Wi-Fi and set up solar or tariff profiles before we leave.

Everything Perth drivers ask.

Do I need a BYD to use it?+

No. Type 2 is the Australian standard, this charger fills a Tesla, Kia, Hyundai or any other EV. You just lose the deep BYD app integration.

Does it divert surplus solar?+

Not natively, the BYD charger is scheduled rather than solar-following. If solar diversion matters to you, look at the Zappi or the Fronius Wattpilot.

Can it be moved to a new house?+

Yes. It's hardwired, so we uninstall and reinstall at the new address. No proprietary lock-in.

How long does a Perth install take?+

Most single-phase installs are done in a single 3–4 hour visit. Three-phase or long cable runs can stretch to a full day. We book, wire, commission and app-pair on the same day so you drive off the next morning charged from your wall.

What warranty backs the install?+

The manufacturer warranty on the unit plus a 10-year Candela workmanship warranty on the mount, cable run, switchboard tie-in, RCD, isolators and any load-management gear we fit.